Irvon Ltd

Irvon Press & Shear have the largest plate processing facilities in the UK with dedicated procedures & equipment for the processing of stainless steel & alloys:

Press Brake: 12.5 metres long X 20 mm thick (or thicker if shorter in length)
Dedicated tooling for stainless steels and nickel alloys to prevent contamination and minimise witness marking.
Plate Rolling: 3 metres wide x 120mm
We are able to roll cylinders up to 60mm thick without excess often saving the processing costs.
Shearing: 8.2 metres X 10mm
A torsion control feature allows us to cut thick and narrow strip without twist.
Hi – Definition plasma cutting
Bevel cutting up to 45° on edges for weld preps etc. Inert gas shielded plasma cut edges where requested require no further dressing.

Main Contact Details

Phone: 01902 354 222
Fax: 01902 354 223

Spring Road Industrial Estate
Spring Road, Ettingshall
West Midlands
United Kingdom

Web Links

Additional Contacts

Andy KimberleyManaging Director01902 355 065
Michelle ArnoldGeneral Manager01902 355


Architecture Building and Construction:  Architectural fabrications, Balustrading, Chequered plate, Architectural metalwork

Flat Products (Coil, Sheet, Strip, Plate):  Blanks, Hot rolled flat products, Plasma cut pieces, Strip

Heating and Ventilation:  Ductwork

Process Plant:  Heat exchangers, Vessels

Sections:  Angles, Channels, Sections - cold formed

Products provided IN-HOUSE


Cutting, Blanking and Piercing:  Flame profile cutting, Plasma cutting, Shearing

Forming:  Bending, Plate rolling, Pressbraking, Cold section rolling

Services provided IN-HOUSE


Office and Postal Address: BSSA, HQ, Blades Enterprise Centre, John Street, Sheffield S2 4SW

Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

Tel: +44 (0)114 292 2636    |     Email:

Copyright © 2018 British Stainless Steel Association

web design sheffield by Llama Digital