Contact BSSA

Category: Classification of Stainless Steels

  1. Classification of Stainless Steel

    Each of the stainless steel ?families? or types (ferritic, martensitic, austenitic, duplex and precipitation hardenable (PH)) are described in more detail than SSAS 1.1 The atomic (crystallographic) structures body centred cubic (bcc) and face centred cubic (fcc) cover ferritic and austenitic types respectively. The chromium ranges, mechanical strength, and magnetic properties are compared and examples of grades for each type of stainless steel given. These include 1.4003 (3Cr12) 1.4016 (430) ferritic, 1.4028 (420S45) 1.4057 (431) 1.4418 (248SV) martensitics, 1.4301 (304/304S31) 1.4307 (304L/304S11) 1.4401 (316/316S31) 1.4404 (316L/316S31) austenitics, 1.4460 (2205 / 318S13) 1.4501 duplex and 1.4542 (17/4PH 17/4 17-4) and 1.4594 (520B) precipitation hardenable grades.

  2. Cutlery stainless steel grades '18/8', '18/10' and '18/0'

    The compositions (chemical analysis) of cutlery and holloware steel types 18/8 (18.8 or 18-8), 18/10 (18.10 or 18-10) and 18/0 are described. The use of these austenitic and ferritic stainless steels for cutlery is briefly outlined and compared to the martensitic stainless steels. LAST UPDATED 1st February 2001

  3. European EN Standard Grade Summary

    A summary of the EN standards for stainless steel products showing which grades appear in which standards.

  4. Ferritic stainless steels

    Ferritic stainless steels are magnetic, have a low carbon content and contain chromium as the main alloying element, typically between 13% and 17%. Examples of ferritic grades are 3Cr12 (1.4003) and 430 (1.4016).

  5. Free machining stainless steels grades

    Sulphur, selenium and calcium treated improved machinability stainless steels are compared. European steel numbers for these grades are listed and include 1.4005 1.4006 1.4021 1.4028 1.4029 1.4031 1.4057 1.4112 1.4125 1.4542 1.4305 1.4307 1.4541 1.4401 and 1.4404. The former BS grades covered by this article include 416S21 416S29 416S37 416S41 441S29 441S49 303S21 303S41 325S21 and 326S36 Grade types 440B 440C and 17/4PH 17/4 17-4 are also mentioned. The short-comings of these types of steels, compared to the un-treated types is outlined.

  6. General principles for selection of stainless steels

    The main factor in the selection process for stainless steels is corrosion resistance. Careful consideration of the application should be done to enable a choice of grade with suitable corrosion resistance whilst keeping costs to an economic minimum. Other considerations such as mechanical properties (strength and toughness), physical properties (magnetic permeability) and forming, fabrication and joining methods available should be secondary. (91)

  7. Glossary of stainless steel terms for non-technical users

    This article has a listing of terms often specifically associated with stainless steels, their processing and use. Terms listed include, active, annealing, austenite, austenitising, bright annealing, cathodic protection, chlorides (halides), cold and hot working, corrosion, creep, deep drawing, duplex, fatigue (endurance),ferrite, martensite, normalizing, passive, passivation, permeability, pH, pickling, pinch pass, pitting, precipitation hardening, scaling temperature, sensitisation, stabilisation, stress relieving, stretch forming and tempering

  8. Martensitic Stainless Steels

    Martensitic stainless steels are magnetic. Their main alloying elements are chromium (typically 18%) and carbon, They are used for strength and moderate corrosion resistance. Examples of martensitic grades are 410 410S21 (1.4006), 420 420S29 (1.4021), 431 431S29 (1.4057) and 440C (1.4125).

  9. On-site methods for stainless steel grade product sorting

    Guidance on methods for sorting stainless steels from low alloy and carbon steels is shown. These include physical (colour, density, magnetic) and mechanical (hardness) properties and chemical tests (copper sulphate, copper chloride, nitric acid and sulphur tests). A suggested approach to a step-by-step procedure for differentiating stainless steels from carbon steels is tabulated. These methods have not been verified by the BSSA, who take no responsibility for their accuracy of the conclusions reached on steel types.

  10. Stainless Steel Datasheets for Tubular Products

    A summary of datasheets for tubular products

top

Office and Postal Address: BSSA, Regus, Blades Enterprise Centre, John Street, Sheffield S2 4SW

Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

Tel: +44 (0)114 292 2636    |     Email: admin@bssa.org.uk

Copyright © 2017 British Stainless Steel Association

web design sheffield by Llama Digital