Contact BSSA

Category: Std Austenitic, Ferritic & Duplex Grades

Page 4 of 4

  1. 1
  2. 2
  3. 3
  4. 4
  1. Mechanical properties for stainless steels to BS EN 10217-7

    Mechanical properties of stainless steels to BS EN 10217-7 for welded stainless steel tubes for pressure purposes.

  2. Product Analysis Tolerances for Steels to EN 10088-2 and EN 10088-3

    In EN 10088-2 and EN 10088-3 the chemical composition ranges are defined for the cast analysis. Any subsequent product analysis may deviate from these ranges by the amounts specified in this article

  3. Selection of stainless steels for surgical implants

    The special compositions, non-metallic inclusion, ferrite and grain size requirements of these steel grades, D and E specified for surgical implants are outlined. Commercially produced 316 type steels cannot be used for surgical implants as the available composition and micro-cleanness information is very unlikely to meet the requirements of BS 7252-1 ISO 5832-1.

  4. Specifying stainless steel for spring applications

    BSEN 10151 (strip) and BSEN 10272-3 (wire) for springs are outlined. The grades in each standard are tabulated and compared to the BS5770-4 and BS2056 which they replace, where grades such as 301S21 301S81 302S26 302S25 and 305S11 were specified. Grades listed include 1.4016 1.4021 1.4028 1.4031 1.4568 (17/7 PH type) 1.4310 1.4301 1.4401 1.4369 1.4372 and 1.4568 Mechanical properties in the cold worked (temper rolled for strip, drawn for wire) conditions are shown. Heat treated properties for precipitation hardening grade 1.4568 wire are also shown.

  5. Stainless steel fasteners

    Stainless steel bolts, screws, studs and nuts are specified to BS EN ISO 3506. The chemical composition and mechanical properties of austenitic, martensitic and ferritic grades are covered

  6. Stainless Steel Grades Datasheets

    Summary of links to websites for download of stainless steel grade datasheets

Page 4 of 4

  1. 1
  2. 2
  3. 3
  4. 4

top

Office and Postal Address: BSSA, Regus, Blades Enterprise Centre, John Street, Sheffield S2 4SW

Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

Tel: +44 (0)114 292 2636    |     Email: admin@bssa.org.uk

Copyright © 2017 British Stainless Steel Association

web design sheffield by Llama Digital