Contact BSSA

Category: BS/BSEN Grades Compositions Properties

Page 3 of 6

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  1. Ambient temperature mechanical properties of stainless steels to BS EN 10269

    BS EN 10269 is the material standard for stainless and heat-resisting steels, a selection of low alloy steels and some nickel alloys for fasteners. The ambient temperature mechanical properties shown in this article include 0.2% proof strength, tensile strength, elongation, reduction in area and impact (charpy) strength in the finally heat treated condition. Specified hardness levels for the steels for subsequent quenching and tempering (1.4923 1.4938 and 1.4913) in their delivery condition are also included.

  2. Ambient temperature physical properties of stainless steels to BS EN 10088-1

    Ambient temperature physical properties, including density, modulus of elasticity (Young's modulus), coefficient of thermal expansion, thermal conductivity, specific heat (heat content or heat capacity) and electrical resistivity for a range of ferritic, martensitic, austenitic and duplex stainless steel types are tabulated. Some explanation of the units used for these properties is given.

  3. BS 6744 2016 (May) Update - Stainless Steel Bars, Reinforcement of Concrete

    Stainless steel bars – Reinforcement of concrete – Requirements and test methods

    This European Standard specifies the requirements and test methods for solid stainless steel bars used for the reinforcement of concrete. It is applicable to ribbed stainless steel bars in grade 500. Several significant changes have been made to the earlier standard version i.e. BS6744:2001 + A2:2009, ‘Stainless steel bars for the reinforcement of and use in concrete – Requirements and test methods’ 

  4. Chemical and mechanical properties of British Standard Aerospace S100 bar grades

    Specified chemical compositions, tensile strength and hardness ranges for aerospace standard grades such as S61, S62, S80 (431 type), S111, S124, S125, S126, S127, S128, S129 (321 type), S130 (347 type), S137, S141, S143, S144, S145 (520B DEF STAN 95-15/14 STA 59 type) , S151, S159, S160 (304LN type), S161 (316LN type) S205 and S206 are listed.

  5. Chemical and mechanical properties of British Standard Aerospace S500 sheet grades

    Specified chemical compositions, tensile strength and hardness ranges for aerospace standard grades such as S524 (321 type), S525 (347 type), S526 (321 type), S527 (321 type), S528, S529, S530, S531, S532 (520S DEF STAN 95-15/1 STA 60 type), S533 (520S DEF STAN 95-15/1 STA 60 type) and S536 (304 type), S537 and S538 are listed.

  6. Chemical composition and mechanical properties of stainless steels to BS 6744

    BS 6744 was originally published in 1986. A recent revision (2009) has introduced 2 new duplex grades. The current version now includes European steel grades (numbers in the standard) 1.4301 1.4436 1.4429 1.4162 1.4362 1.4462 1.4501 1.4529.The chemical composition of stainless steels covered in the this standard are shown along with the specified tensile properties for the 'grades' 200 500 and 650

  7. Chemical composition of creep resisting steels to BS EN 10302

    BS EN 10302 is the material standard for creep resisting steels, nickel and cobalt alloys. Martensitic and austenitic steels are included. The latest edition was published in April 2008. There are some minor changes and the addition of one new grade 1.4951 which is a 310 with a minimum carbon content. The chemical composition of steel grades covered in the this standard include 1.4903 1.4905 1.4911 1.4913 1.4922 1.4923 1.4935 1.4938 1.4910 1.4919 1.4941 1.4945 1.4951 1.4958 1.4959 1.4961 1.4962 1.4971 1.4980 1.4981 1.4983 and 1.4988

  8. Chemical composition of heat resisting steels to BS EN 10095

    BS EN 10095 is the material standard for heat resisting steels and nickel alloys. The chemical composition of stainless steel grades covered in the this standard include 1.4713 1.4724 1.4742 1.4762 1.4749 1.4736 1.4878 1.4828 1.4835 1.4833 1.4845 1.4841 1.4864 1.4876 1.4877 1.4872 1.4818 1.4854 1.4886 1.4887 and 1.4821.

  9. Chemical composition of stainless steel castings to BS EN 10283

    BS EN 10283 is the material standard for stainless steel castings for corrosion resisting purposes. The chemical composition of stainless steel grades covered in the this standard include 1.4011 1.4008 1.4317 1.4405 1.4411 1.4525 1.4309 1.4308 1.4552 1.4409 1.4408 1.4581 1.4412 1.4446 1.4458 1.4527 1.4584 1.4416 1.4587 1.4588 1.4593 1.4347 1.4470 1.4468 1.4517 1.4417 and 1.4469.

  10. Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2

    BS EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. The current edition was published in October 2014. There have been 14 new grades added compared to the 2005 edition and the compositions of 3 grades have been changed including 2 austenitic grades (1.4371, 1.4597) and one duplex grade (1.4362).   LAST UPDATED 13th November 2014.

    The new grades added include austenitic grades 1.4618, 1.4376, 1.4640, 1.4646, austenitic-ferritic (duplex) grades
    1.4162, 1.4662, 1.4482, 1.4062 and ferritic grades 1.4600, 1.4607, 1.4611, 1.4613, 1.4630, 1.4634.

Page 3 of 6

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

top

Office and Postal Address: BSSA, Regus, Blades Enterprise Centre, John Street, Sheffield S2 4SW

Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

Tel: +44 (0)114 292 2636    |     Email: admin@bssa.org.uk

Copyright © 2017 British Stainless Steel Association

web design sheffield by Llama Digital