The Schaeffler and Delong diagrams for predicting ferrite levels in austenitic stainless steel welds

Introduction

Ferrite is important in avoiding hot cracking in during cooling from welding of austenitic stainless steels. 'Constitution diagrams' are used to predict ferrite levels from the composition by comparing the effects of austenite and ferrite stabilising elements. The Schaeffler and Delong diagrams are the original methods of predicting the phase balances in austenitic stainless steel welds.

Nickel and chromium equivalents

A 'nickel equivalent' is calculated for the austenite stabilising elements and a 'chromium equivalent' ferrite stabilising elements. These are used as the axes for the diagrams, which show the compositional equivalent areas where the phases austenite, ferrite, martensite (and mixtures of these) should be present. Although intended to show the phase balance of weld fillers, these diagrams can also be used to illustrate the phase balance of the 'parent' material. There are different diagrams for different alloy systems.

Schaffler Diagram

The nickel and chromium equivalents use the formulae.

    Ni (eq) = Ni + (30 x C) + (0.5 x Mn)
    Cr (eq) = Cr + Mo + (1.5 x Si) + (0.5 x Nb)

This gives a diagram that is useful for the austenitic steels, except those with nitrogen additions. The values for typical 304(1.4301) and 316(1.4401) compositions are shown below.

. Ni (equiv) Cr (equiv)
304(1.4301) 10.15 18.92
316(1.4401) 13.15 19.83

The diagram, identifying the phase boundaries is shown below.

 

 

Delong Diagram

This refines the Schaffler diagram by taking account of the strong austenite stabilising tendency of nitrogen. The chromium equivalent is unaffected but the nickel equivalent is modified to

    Ni (eq) = Ni + (30 x C) + (0.5 x Mn) + (30 x N)

The diagram, identifying the phase boundaries is shown below. This shows the ferrite levels in bands, both as percentages, based on metallographic determinations and as a ferrite number 'FN', based on magnetic determination methods.

 

 

top

Office and Postal Address: BSSA, Park Suite, Forsyth Enterprise Centre, Bramall Lane, Sheffield S2 4SU

Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

Tel: +44 (0)114 292 2636    |     Fax: +44 (0)114 292 2633     |     Email: admin@bssa.org.uk

Copyright © 2007-2013 British Stainless Steel Association

web design sheffield by Llama Digital